How To Use A Tv As A Video Camera Monitor
How to Connect a Security Camera to a Television
Some customers want to connect their security photographic camera directly to a TV without recording to a CCTV DVR. These customer typically but want to brandish the live video feed from their CCTV camera on a TV monitor without recording whatsoever surveillance footage to a hard drive. This article will explain several ways to do this depending on the type of photographic camera that you lot have, and if you are using a single camera or multiple cameras.
- How-to connect an analog CCTV camera to a TV - Follow these instructions if yous are using an analog CCTV camera (CVBS). E.G. 960H, D1, CIF resolution.
- How-to connect an Hard disk security camera to a TV - Follow these instructions if you are using a Hard disk-over-Coax / HD BNC security camera. Video format: AHD, Hd-TVI, HD-CVI. Resolutions: 720p, 1080p, 3mp, 4mp, 5mp, 8mp / 4K.
- How-to brandish multiple security cameras on a Telly - Follow these instructions if y'all would like to display multiple security cameras on a single TV screen using a video multiplexer. This works for analog CCTV cameras and HD security cameras.
- How-to display your security cameras on multiple TVs - Follow these instruction if you would similar to send the video point from 1 or multiple security cameras on multiple TVs.
If you are interested in high definition instead of analog, you may be interested in checking out these complete Goggle box display systems for HD security cameras.
Why would someone want to use a security camera only to view live video and not record any surveillance footage to a DVR?
Here are some uses that customers accept told u.s. about.
- Check who is at the door at a habitation or business location.
- Provide customers with a alive view of some betoken of interest within the business.
- Provide a theft deterrent system by showing by displaying live video on a monitor.
Connect CCTV Camera to TV
Hither is an installation diagram that shows how an analog CCTV camera can exist directly continued to a TV / monitor.
This is how it works.
- The CCTV camera video out and power in connected to a pre-made Siamese security photographic camera cable. Cable cut from a spool of RG59 Siamese cable tin can also be used. Siamese is used in BNC security camera applications to run both video and power to / from cameras.
- Because both video ends of the cablevision has male BNC connectors, the TV side must exist converted to an RCA male connector then that it tin plug into the female RCA input on the Telly. You tin use this BNC to RCA connector.
- The three.1mm power plug connects right to the DC power supply that is included with the camera and the ability supply plugs into a standard 110 power outlet.
- When the user wants to view the alive video from the security camera, they just select the video input of the RCA in that they used and video is displayed.
- Optional and explained below - If the user wants to also hear audio on the TV, they tin can connect a stand alone audio surveillance microphone to i of the RCA inputs of the Boob tube.
Below is a list of equipment that was used in the above diagram.
Connect Surveillance Mic to TV Sound
If y'all also want to hear audio surveillance in add-on to the alive security photographic camera view on you lot Television, the below diagram shows a surveillance microphone can be continued to your TV. This is optional to utilise.
Connect Hard disk Security Photographic camera to Television receiver
If you want to connect an HD security photographic camera to a TV, you demand to utilise a BNC to HDMI converter. This setup is applicable to the following HD security cameras that use the aforementioned coax cablevision as analog CCTV cameras: AHD, Hard disk-TVI, and Hard disk-CVI, 720p through 4K resolution.
In this installation diagram a 4K BNC security camera is used. Even so any of these Hard disk drive security cameras are also supported. This is how it works.
- The cherry line represents the coax cable that connects the BNC output of the camera to the BNC input on the HDCV-3-T BNC to HDMI converter. But like the analog CCTV installation to a higher place, this can be pre-made Siamese cable or cable cutting from a spool of RG59 Siamese cable.
- The blue line represents the HDMI cable that connects the HDMI output of the HDCV-3T to an HDMI input on the Television.
- To come across a live view of the camera, simply switch to that HDMI input using the TV remote.
Connect Hard disk Security Camera to HDMI Monitor Input
In improver to analog CCTV cameras, you can now connect Hard disk drive security cameras (AHD CCTV) to the HDMI input of a Television set monitor. Scout the below video to see how this is done using a 720p and 1080p security camera.
Spotter the above video to see a demonstration of the AHD-CV7 AHD to HDMI video converter. Please note that CCTV Camera Pros now recommends out HDCV-iii-T BNC to HDMI converter equally is supports more video formats and resolutions.
How to View Multiple Security Cameras on a TV
If y'all want to view live video from multiple security cameras on a single Boob tube screen, you can use a 4ch CCTV multiplexer. Nosotros also have viii and 16 channel CCTV multiplexers.
How it Works
- The security cameras are hard wired to the BNC video inputs of the CCTV quad multiplexer using RG59 coax cablevision. If you are using an HD security camera multiplexer like these, you can utilize analog CCTV cameras and HD BNC security cameras.
- The cameras are wired to the multiplexer with premade RG59 jumper cables, pre-made Siamese CCTV camera cable, or RG59 Siamese from a spool.
- The multiplexer (mux) has a single BNC video output. You can employ another RG59 jumper to run the video from the mux to the TV.
- On the TV end of the cable, the BNC connector can exist converted to a male RCA with this connector.
- The video multiplexer processor tin be configured to display all 4 cameras on the screen. It tin likewise be configured in other ways such as single motion-picture show scrolling with delay, picture in picture, dual movie, and more. Yous watch the below video to see some of the unlike screen configurations that are supported by a xvi channel video multiplexer.
Video Multiplexer Demo
The in a higher place video demonstrates the 4K video output of the VM-HD4 CCTV quad multiplexer. Video multiplexers let y'all display multiple security cameras on i screen. In the video, the multiplexer is continued to iv 4K security cameras.
How-to Brandish Your Security Camera on Multiple TVs
CCTV Camera Pros has several solutions bachelor for customers that want to display their security cameras on more than one TV. One solution is using this HDMI over Ethernet kit. Please note that we are using a CCTV multiplexer every bit the HDMI source in this example, however, if you only need to brandish i security photographic camera, you tin also utilize the HDCV-3-T BNC to HDMI converter instead of the multiplexer.
This is how information technology works.
- The red line at the lesser is a standard HDMI video cable that connects the video multiplexer's HDMI output to the HDMI input of the HDMI over IP transmitter (TX).
- The RJ-45 Ethernet port on the TX is connected to one of the ports of the network switch.
- Two HDMI receivers (RX) are connected to the same network switch and both are configured to receive the HDMI video bespeak from the same transmitter.
- The HDMI output from each receiver is connected to a Idiot box monitor.
- The multiplexer can be controlled from either Telly location because each receiver tin transmit commands from the IR remote command dorsum to the multiplexer.
Related Articles
Here are some additional articles that y'all may be interested in.
- five Great BNC to HDMI Converter Solutions for Security Cameras
- How-to brandish live video from multiple security cameras on one Tv set
- How-to display live video from Multiple IP Cameras on 1 HDMI TV
- How-to Use Central Monitoring Software to View Security Cameras at Multiple Locations
- How-to Stream on Facebook Alive with Multiple Cameras
Related Video Surveillance Equipment
- Security Camera Television receiver Brandish Systems
- Subconscious Security Cameras
- Dome Security Cameras
- IR Security Cameras
- Turret Fashion CCTV Cameras
- HDMI to USB Converter
- HDMI over Powerline
- Live Streaming Camera Systems
- HD-SDI to HDMI Converter - HD-SDI cameras were popular before AHD and Hard disk-TVI video standards were adopted. They are still used by some customers.
- Security camera mounting box - our universal CCTV junction boxes work great with CCTV cameras and network IP cameras.
Article Thumbnail
Author Info
This commodity was written past , co-founder and managing partner of CCTV Camera Pros. Questions about this article can be directed to mike@cctvcamerapros.net.
Source: https://www.cctvcamerapros.com/Connect-CCTV-Camera-to-TV-s/798.htm
Posted by: mcculloughhimper.blogspot.com
0 Response to "How To Use A Tv As A Video Camera Monitor"
Post a Comment